TMK063UJ070DT [TAIYO YUDEN]
Ceramic Capacitor, Multilayer, Ceramic, 25V, 7.1429% +Tol, 7.1429% -Tol, UJ, -750ppm/Cel TC, 0.000007uF, 0201,;型号: | TMK063UJ070DT |
厂家: | TAIYO YUDEN (U.S.A.), INC |
描述: | Ceramic Capacitor, Multilayer, Ceramic, 25V, 7.1429% +Tol, 7.1429% -Tol, UJ, -750ppm/Cel TC, 0.000007uF, 0201, |
文件: | 总15页 (文件大小:460K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Notice for TAIYO YUDEN productsꢀ
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■ Product information in this catalog is as of October 2010. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully be-
fore practical application or usage of the Products.
Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorpo-
rating such products, which are caused under the conditions other than those specified in this catalog or individual
specification.
■ Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is
available.
■ Please conduct validation and verification of products in actual condition of mounting and operating environment
before commercial shipment of the equipment.
■ All electronic components or functional modules listed in this catalog are developed, designed and intended for
use in general electronics equipment.(for AV, office automation, household, office supply, information service,
telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any
equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have
direct influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance.
Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, subma-
rine system, military, etc. where higher safety and reliability are especially required.
In addition, even electronic components or functional modules that are used for the general electronic equipment,
if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliabil-
ity evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to
install a protective circuit is strongly recommended at customer's design stage.
■ The contents of this catalog are applicable to the products which are purchased from our sales offices or distribu-
tors (so called“TAIYO YUDEN’s official sales channel”).
It is only applicable to the products purchased from any of TAIYO YUDEN’s official sales channel.
■ Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may oc-
cur in connection with a third party's intellectual property rights and other related rights arising from your usage of
products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights.
■ Caution for export
Certain items in this catalog may require specific procedures for export according to“Foreign Exchange and For-
eign Trade Control Law”of Japan,“U.S. Export Administration Regulations”, and other applicable regulations.
Should you have any question or inquiry on this matter, please contact our sales staff.
notice_e-01
STANDARD MULTILAYER CERAMIC CAPACITORS
CLASS1:TEMPERATURE COMPENSATING TYPE
(
)
REFLOW
■ FEATURES
■ APPLICATIONS
◦Gꢀ eneral electronic equipment
◦ꢀImproved higher density mounting.
◦Cꢀ ommunication equipment
(cellular phone, wireless applications, etc.)
◦ꢀMonolithic structure provides higher reliability.
◦A wide range of capacitance values available in standard case sizes.
■ PART NUMBER
U M K 1 0 5 △ C H 1 0 1 J V - F △
❶
❷
❸
❹
❺
❻
❼
❽
❾
❿
⓫
⓬
❶Rated voltage
〔VDC〕
❸End termination
Plated
❻Temperature characteristics〔ppm/℃〕
❽Capacitance
❿Special code
tolerance
K
C□:0
R□:-220 RH
S□:-330 SH、SJ、SK
T□:-470 TJ、TK
U□:-750 UJ、UK
SL:+350~-1000
CH、CJ、CK
-
Standard
E
16
25
50
Tolerance
H:±60
J:±120
K:±250
C
D
F
±0.25pF
±0.5pF
±1pF
❹Dimension
T
⓫Packaging
Type (inch) L×W〔mm〕
042 (01005) 0.4×0.2
063 (0201) 0.6×0.3
105 (0402) 1.0×0.5
U
φ178mm Taping
(2mm pitch)
F
J
±5%
❷Series name
K
±10%
φ178mm Taping
(1mm pitch, 042 Type)
W
Multilayer ceramic
capacitor
□=Tolerance
M
❾Thicknes〔s mm〕
⓬Internal code
❺Dimension tolerance
Standard
△=Blank space
❼Nominal capacitance〔pF〕
example
C
0.2
0.3
0.5
△
Standard
△
P, T
W, V
△=Blank space
0R5
010
100
0.5
1
10
※R=decimal point
■ STANDARD EXTERNAL DIMENSIONS/STANDARD QUANTITY
Dimension [mm]
Standard quantity [pcs]
Type
L
W
T
e
Paper tape
Embossed tape
□MK042
0.4±0.02
0.2±0.02
0.2±0.02
0.3±0.03
0.5±0.05
C
0.1±0.03
-
40000
(01005 inch)
□MK063
(0201 inch)
□MK105
(0402 inch)
0.6±0.03
1.0±0.05
0.3±0.03
0.5±0.05
P, T
W,V
0.15±0.05
0.25±0.10
15000
10000
-
-
■ AVAILABLE CAPACITANCE RANGE
042
C□
063
105
50V
Type
C□
U□
C□
U□
SL
R□
S□
T□
Cap
[pF]
VDC
[3-digit]
16V
50V
25V
0.5
1
0R5
010
1R5
020
030
040
050
060
070
080
090
100
120
150
180
220
270
330
390
470
560
680
820
101
121
151
181
221
271
331
391
471
561
681
821
102
1.5
2
P
3
W
4
5
C
T
W
6
W
W
7
8
9
W
10
12
15
18
22
27
33
39
47
56
68
82
100
120
150
180
220
270
330
390
470
560
680
820
1000
T
C
V
V
V
Note: Letters in the table indicate thickness.
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc02_e-01
12
■ REPRESENTATIVE PART NUMBERS
●042TYPE
Class1【C△ characteristic】
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance Capacitance
Thickness
〔mm〕
Part number 1
Part number 2
Q
Note
% Rated
voltage
〔pF〕
tolerance
16V
EMK042 CK0R5CC
EMK042 CK010CC
EMK042 CK1R5CC
EMK042 CK020CC
EMK042 CJ030CC
EMK042 CH040CC
EMK042 CH050CC
EMK042 CH060DC
EMK042 CH070DC
EMK042 CH080DC
EMK042 CH090DC
EMK042 CH100DC
EMK042 CH120JC
EMK042 CH150JC
EMK042 CH180JC
EMK042 CH220JC
EMK042 CH270JC
EMK042 CH330JC
EMK042 CH390JC
EMK042 CH470JC
EMK042 CH560JC
EMK042 CH680JC
EMK042 CH820JC
EMK042 CH101JC
CK
CK
CK
CK
CJ
0.5
1
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
410
420
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
1.5
2
430
440
460
480
500
520
3
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
4
5
6
7
540
8
560
580
600
640
700
9
10
12
15
18
22
27
33
39
47
56
68
82
100
760
840
940
1000
1000
1000
1000
1000
1000
1000
±5%
±5%
±5%
Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.
●063TYPE
Class1【C△ characteristic】
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance Capacitance
Thickness
〔mm〕
Part number 1
Part number 2
Q
Note
% Rated
voltage
〔pF〕
tolerance
50V
UMK063 CK0R5CP
UMK063 CK010CP
UMK063 CK1R5CP
UMK063 CK020CP
UMK063 CJ030CP
UMK063 CH040CP
UMK063 CH050CP
UMK063 CH060DP
UMK063 CH070DP
UMK063 CH080DT
UMK063 CH090DT
UMK063 CH100DT
UMK063 CH120JT
UMK063 CH150JT
UMK063 CH180JT
UMK063 CH220JT
UMK063 CH270JT
UMK063 CH330JT
UMK063 CH390JT
UMK063 CH470JT
UMK063 CH560JT
UMK063 CH680JT
UMK063 CH820JT
UMK063 CH101JT
CK
CK
CK
CK
CJ
0.5
1
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
410
420
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
Special code:G
Special code:G
Special code:G
Special code:G
Special code:G
Special code:G
Special code:G
Special code:G
Special code:G
1.5
2
430
440
460
480
500
520
3
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
4
5
6
7
540
8
560
580
600
640
700
9
10
12
15
18
22
27
33
39
47
56
68
82
100
760
840
940
1000
1000
1000
1000
1000
1000
1000
±5%
±5%
±5%
Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.
Class1【U△ characteristic】
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance Capacitance
Thickness
〔mm〕
Part number 1
Part number 2
Q
Note
% Rated
voltage
〔pF〕
tolerance
25V
TMK063 UK0R5CT
TMK063 UK010CT
TMK063 UK1R5CT
TMK063 UK020CT
TMK063 UK030CT
TMK063 UJ040CT
TMK063 UJ050CT
TMK063 UJ060DT
TMK063 UJ070DT
TMK063 UJ080DT
TMK063 UJ090DT
TMK063 UJ100DT
TMK063 UJ120JT
TMK063 UJ150JT
UK
UK
UK
UK
UK
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
0.5
1
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±5%
410
420
430
440
460
480
500
520
540
560
580
600
640
700
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
R
R
R
R
R
R
R
R
R
R
R
R
R
R
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
1.5
2
3
4
5
6
7
8
9
10
12
15
±5%
Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc02_e-01
13
■ REPRESENTATIVE PART NUMBERS
●105TYPE
Class1【C△ characteristic】
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance Capacitance
Thickness
〔mm〕
Part number 1
Part number 2
Q
Note
% Rated
voltage
〔pF〕
tolerance
50V
UMK105 CK0R5CW
UMK105 CK010CW
UMK105 CK1R5CW
UMK105 CK020CW
UMK105 CJ030CW
UMK105 CH040CW
UMK105 CH050CW
UMK105 CH060DW
UMK105 CH070DW
UMK105 CH080DV
UMK105 CH090DV
UMK105 CH100DV
UMK105 CH120JV
UMK105 CH150JV
UMK105 CH180JV
UMK105 CH220JV
UMK105 CH270JV
UMK105 CH330JV
UMK105 CH390JV
UMK105 CH470JV
UMK105 CH560JV
UMK105 CH680JV
UMK105 CH820JV
UMK105 CH101JV
UMK105 CH121JV
UMK105 CH151JV
UMK105 CH181JV
UMK105 CH221JV
UMK105 CH271JV
UMK105 CH331JV
CK
CK
CK
CK
CJ
0.5
1
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
410
420
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
1.5
2
430
440
3
460
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
4
480
5
500
6
520
7
540
8
560
9
580
10
12
15
18
22
27
33
39
47
56
68
82
100
120
150
180
220
270
330
600
640
700
760
840
940
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.
Class1【U△ characteristic】
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance Capacitance
Thickness
〔mm〕
Part number 1
Part number 2
Q
Note
% Rated
voltage
〔pF〕
tolerance
50V
UMK105 UK0R5CW
UMK105 UK010CW
UMK105 UK1R5CW
UMK105 UK020CW
UMK105 UK030CW
UMK105 UJ040CW
UMK105 UJ050CW
UMK105 UJ060DW
UMK105 UJ070DW
UMK105 UJ080DW
UMK105 UJ090DW
UMK105 UJ100DW
UMK105 UJ120JW
UMK105 UJ150JW
UMK105 UJ180JW
UMK105 UJ220JV
UMK105 UJ270JV
UMK105 UJ330JV
UMK105 UJ390JV
UMK105 UJ470JV
UMK105 UJ560JV
UMK105 UJ680JV
UMK105 UJ820JV
UMK105 UJ101JV
UMK105 UJ121JV
UMK105 UJ151JV
UMK105 UJ181JV
UMK105 UJ221JV
UMK105 UJ271JV
UMK105 UJ331JV
UK
UK
UK
UK
UK
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
0.5
1
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
410
420
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
1.5
2
430
440
3
460
4
480
5
500
6
520
7
540
8
560
9
580
10
12
15
18
22
27
33
39
47
56
68
82
100
120
150
180
220
270
330
600
640
700
760
840
940
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc02_e-01
14
■ REPRESENTATIVE PART NUMBERS
Class1【SL characteristic】
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance Capacitance
Thickness
〔mm〕
Part number 1
Part number 2
Q
Note
% Rated
voltage
〔pF〕
tolerance
50V
UMK105 SL121JV
UMK105 SL151JV
UMK105 SL181JV
UMK105 SL221JV
UMK105 SL271JV
UMK105 SL331JV
SL
SL
SL
SL
SL
SL
120
150
180
220
270
330
±5%
±5%
±5%
±5%
±5%
±5%
1000
1000
1000
1000
1000
1000
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
200%
200%
200%
200%
200%
200%
Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.
Class1【RH characteristic】
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance Capacitance
Thickness
〔mm〕
Part number 1
Part number 2
Q
Note
% Rated
voltage
〔pF〕
tolerance
50V
UMK105 RH5R6JW
UMK105 RH6R8JW
UMK105 RH8R2JW
UMK105 RH100JW
UMK105 RH120JW
UMK105 RH150JW
UMK105 RH180JW
UMK105 RH200JW
RH
RH
RH
RH
RH
RH
RH
RH
5.6
6.8
8.2
10
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
512
536
564
600
640
700
760
800
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
R
R
200%
200%
200%
200%
200%
200%
200%
200%
12
15
18
20
Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.
Class1【S△ characteristic】
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance Capacitance
Thickness
〔mm〕
Part number 1
Part number 2
Q
Note
% Rated
voltage
〔pF〕
tolerance
50V
UMK105 SK0R5BW
UMK105 SK010BW
UMK105 SK1R2BW
UMK105 SK1R5BW
UMK105 SK1R8BW
UMK105 SK2R2JW
UMK105 SK2R7JW
UMK105 SJ3R3JW
UMK105 SJ3R9JW
UMK105 SH4R7JW
UMK105 SH5R6JW
UMK105 SH6R8JW
UMK105 SH8R2JW
UMK105 SH100JW
UMK105 SH120JW
UMK105 SH150JW
UMK105 SH180JW
UMK105 SH200JW
SK
SK
SK
SK
SK
SK
SK
SJ
0.5
1
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
410
420
424
430
436
444
454
466
478
494
512
536
564
600
640
700
760
800
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10
SJ
SH
SH
SH
SH
SH
SH
SH
SH
SH
12
15
18
20
Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.
Class1【T△ characteristic】
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance Capacitance
Thickness
〔mm〕
Part number 1
Part number 2
Q
Note
% Rated
voltage
〔pF〕
tolerance
50V
UMK105 TK0R5BW
UMK105 TK010BW
UMK105 TK1R2BW
UMK105 TK1R5BW
UMK105 TK1R8BW
UMK105 TK2R2JW
UMK105 TK2R7JW
UMK105 TK3R3JW
UMK105 TK3R9JW
UMK105 TJ4R7JW
UMK105 TJ5R6JW
UMK105 TJ6R8JW
UMK105 TJ8R2JW
UMK105 TJ100JW
UMK105 TJ120JW
UMK105 TJ150JW
UMK105 TJ180JW
UMK105 TJ200JW
TK
TK
TK
TK
TK
TK
TK
TK
TK
TJ
0.5
1
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
410
420
424
430
436
444
454
466
478
494
512
536
564
600
640
700
760
800
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10
TJ
TJ
TJ
TJ
TJ
12
TJ
15
TJ
18
TJ
20
Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc02_e-01
15
■ PACKAGING
①Minimum Quantity
◦Taped package
③Representative taping dimensions
ꢁ◦Paper Tape(8mm wide)
ꢁ◦Pressed carrier tape(2mm pitch)
Thickness
mm
Standard quantity [pcs]
Type
Embossed
㧗0.1/−0
code
Paper tape
tape
□
MK042
0.2
0.3
C
P,T
P
—
15000
40000
□MK063
0.3
□2K096
0.45
0.3
K
10000
P
□WK105
0.5
V
—
T1
0.2
C
P
20000
15000
□MK105
□VK105
0.3
0.5
V, W
W
K
Unit:mm
10000
0.5
Chip Cavity
Insertion Pitch
Tape Thickness
Type
0.45
0.5
4000
A
B
F
T
T1
□MK107
□WK107
V
—
4000
□MK063
□WK105
0.37
0.67
0.45max.
0.42max.
0.42max.
2.0±0.05
0.8
A
0.65
1.15
0.45max.
0.5
V
□2K110
0.6
B
4000
—
0.8
A
◦Punched carrier tape(2mm pitch)
0.45
0.85
1.25
0.85
0.85
0.85
1.15
1.25
1.6
K
□MK212
□WK212
D
㧗0.1/−0
G
D
—
3000
□4K212
□2K212
D
4000
—
D
F
□MK316
3000
2000
G
L
—
0.85
1.15
1.9
D
Unit:mm
F
Chip Cavity
Type
Insertion Pitch
Tape Thickness
T
□MK325
N
Y
—
—
A
B
F
2.0max
2.5
0.45max.
0.6max.
M
M
500(T), 1000(P)
□2K096
0.72
1.02
□MK432
2.5
500
52.0±0.05
□MK105
□VK105
0.65
1.15
0.8max.
②Taping material
※No bottom tape for pressed carrier tape
◦Punched carrier tape(4mm pitch)
◦Paper tape
㧗0.1/−0
Unit:mm
Chip Cavity
Type
Insertion Pitch
F
Tape Thickness
T
A
B
□MK107
□WK107
□2K110
1.0
1.15
1.8
1.1max.
1.0max.
◦Embossed tape
1.55
□MK212
□WK212
□4K212
□2K212
4.0±0.1
1.65
2.0
2.4
3.6
1.1max.
□MK316
◦Chip filled
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc_pack_e-01
mlcc_pack-P1
■ PACKAGING
◦Embossed tape(4mm wide)
④Trailer and Leader
0.8±0.04
0.9±0.05
100mm or more
Trailer 160mm min.
Leader 400mm min.
1.0±0.02
2.0±0.04
F
Unit:mm
Tape Thickness
⑤Reel size
Chip Cavity
Insertion Pitch
Type
□MK042
A
B
F
K
T
t
0.23
0.43
1.0±0.02
0.5max.
0.25max.
E
C
◦Embossed tape(8mm wide)
A
㧗0.1/−0
B
D
R
W
Unit:mm
A
B
C
φ178±2.0
φ50min.
φ13.0±0.2
Unit:mm
Tape Thickness
D
E
R
Chip Cavity
Type
Insertion Pitch
F
φ21.0±0.8
2.0±0.5
1.0
A
B
K
T
□WK107
□MK212
□MK316
□MK325
1.0
1.65
2.0
2.8
1.8
2.4
3.6
3.6
1.3max
0.25±0.1
t
W
4.0±0.1
4mm wide tape
8mm wide tape
12mm wide tape
1.5max.
2.5max.
2.5max.
5±1.0
10±1.5
14±1.5
3.4max.
0.6max.
◦Embossed tape(12mm wide)
⑥Top Tape Strength
㧗0.1/−0
The top tape requires a peel-off force of 0.1 to 0.7N in the direction of the arrow
as illustrated below.
2.0±0.1
F
⑦Bulk Cassette
The exchange of individual specification is necessary.
Please contact Taiyo Yuden sales channels.
Unit:mm
Tape Thickness
Chip Cavity
Type
Insertion Pitch
A
B
F
K
T
□MK432
3.7
4.9
8.0±0.1
4.0max.
0.6max.
12±0.1
36+0/-0.2
110±0.7
2.0+0/-0.1
1.5+0.1/-0
1.0+0/-0.1
Unit:mm
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc_pack_e-01
mlcc_pack-P2
■ RELIABILITY DATA
Super Low Distortion Multilayer Ceramic Capacitors and Medium-High
Voltage Multilayer Ceramic Capacitors are noted separately.
Multilayer Ceramic Capacitors
1.Operating Temperature Range
Standard
Temperature Compensating
(Class 1)
-55 to +125℃
Specification
High Frequency Type
Temperature Range
B
-25 to +85℃
-55 to +85℃
-55 to +125℃
-55 to +105℃
-55 to +125℃
-25 to +85℃
-30 to +85℃
BJ
X5R
X7R
X6S
X7S
F
Specified
Value
B7
C6
C7
High Permittivity(Class 2)
F
Y5V
2. Storage Conditions
Standard
Temperature Compensating
(Class 1)
-55 to +125℃
Specification
High Frequency Type
Temperature Range
-25 to +85℃
-55 to +85℃
-55 to +125℃
-55 to +105℃
-55 to +125℃
-25 to +85℃
-30 to +85℃
B
BJ
X5R
X7R
X6S
X7S
F
Specified
Value
B7
C6
C7
High Permittivity(Class 2)
F
Y5V
3. Rated Voltage
Standard
50VDC, 25VDC, 16VDC
50VDC, 16VDC
Temperature Compensating
(Class 1)
Specified
Value
High Frequency Type
High Permittivity(Class 2)
50VDC, 35VDC, 25VDC, 16VDC, 10VDC, 6.3VDC, 4VDC
4. Withstanding Voltage(Between terminals)
Standard
Temperature Compensating
(Class 1)
Specified
Value
High Frequency Type
No breakdown or damage
High Permittivit(y Class 2)
【Test Methods and Remarks】
Class 1
Class 2
Applied voltage
Duration
Rated voltage×3 Rated voltage×2.5
1 to 5 sec.
Charge/discharge current
50mA max.
5. Insulation Resistance
Standard
Temperature Compensating
(Class 1)
10000 MΩ min.
Specified
Value
High Frequency Type
C≦0.047μF : 10000 MΩ min.
C>0.047μF : 500MΩ・μF
High Permittivity(Class 2)Note 1
【Test Methods and Remarks】
Applied voltage: Rated voltage
Duration: 60±5 sec.
Charge/discharge current: 50mA max.
6. Capacitance(Tolerance)
0.5pF≦C≦5pF:±0.25pF
0.5pF<C≦10pF:±0.5pF
C>10pF:±5%
0.5pF≦C≦2pF:±0.1pF
C>2pF:±5%
RH
S△
T△
C△
U△
Standard
Temperature Compensating
(Class 1)
ꢁ
Specified
Value
0.5pF≦C≦2pF:±0.1pF
C>2pF:±5%
CH
RH
High Frequency Type
High Permittivity(Class 2)
BJ, B7, C6,C7:±10% or ±20%, F:-20%/+80%
【Test Methods and Remarks】
Class 1
Class 2
Standard
High Frequency Type
C≦10μF
C>10μF
Preconditioning
None
Thermal treatment(at 150℃ for 1hr)Note 2
Measuring frequency
Measuring voltage Note 1
Bias application
1MHz±10%
0.5 to 5Vrms
1kHz±10%
1±0.2Vrms
120±10Hz
0.5±0.1Vrms
None
7. Q or Dissipation Factor
Standard
C<30 pF:Q≧400+20C、C≧30 pF:Q≧1000ꢁ(C:Nominal capacitance)
Refer to detailed specification
Temperature Compensating
(Class 1)
Specified
Value
High Frequency Type
High Permittivit(y Class 2)Note 1
BJ, B7, C6,C7:2.5% max.,ꢁF:7% max.
【Test Methods and Remarks】
Class 1
High Frequency Type
Class 2
Standard
C≦10μF
C>10μF
Preconditioning
None
Thermal treatment(at 150℃ for 1hr)Note 2
Measuring frequency
Measuring voltage Note 1
Bias application
1MHz±10%
1GHz
1kHz±10%
1±0.2Vrms
120±10Hz
0.5±0.1Vrms
High Frequency Type
Measuring equipment: HP4291A
Measuring jig: HP16192A
0.5 to 5Vrms
None
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc_reli_e-01
mlcc_reli-R1
■ RELIABILITY DATA
8. Temperature Characteristic(Without voltage application)
Temperature Characteristic[ppm/℃]
C□ :0 CH, CJ, CK
Tolerance
Standard
R□ :ー220 RH
H±60
J±120
K±250
Temperature Compensating
(Class 1)
S□ :ー330 SH, SJ, SK
T□ :ー470 TJ, TK
U□ :ー750 UJ, UK
SL :+350 to -1000
High Frequency Type
Specified
Value
Specification Capacitance change Reference temperature
Temperature Range
-25 to +85℃
-55 to +85℃
-55 to +125℃
-55 to +105℃
-55 to +125℃
-25 to +85℃
-30 to +85℃
B
±10%
±15%
20℃
25℃
25℃
25℃
25℃
20℃
25℃
BJ
X5R
X7R
X6S
X7S
F
B7
C6
C7
±15%
±22%
±22%
+30/ー80%
+22/ー82%
High Permittivity(Class 2)
F
Y5V
【Test Methods and Remarks】
Class 1
Capacitance at 20℃ and 85℃ shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the following equation.
(C85-C20
)
6
× 10(ppm/℃)
C20×△Tꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁ△T=65
Class 2
Capacitance at each step shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the following equation.
(C-C2)
×100(%)
Step
B、F
Minimum operating temperature
20℃ 25℃
X5R、X7R、X6S、X7S、Y5V
C2
1
2
3
C
:Capacitance in Step 1 or Step 3
C2 :Capacitance in Step 2
Maximum operating temperature
9. Deflection
Appearance :
No abnormality
Standard
Capacitance change : Within ±5% or ±0.5 pF, whichever is larger.
Temperature Compensating
(Class 1)
Specified
Value
Appearance :
Capacitance change : Within±0.5 pF
Appearance : No abnormality
Capacitance change : Within ±12.5%(BJ, B7, C6, C7), Within ±30%(F)
No abnormality
High Frequency Type
High Permittivity(Class 2)
【Test Methods and Remarks】
Multilayer Ceramic Capacitors
Board
Thickness
0.8mm
Warp Duration
1mm 10 sec.
042、063 Type
The other types
Board
glass epoxy-resin substrate
Warp
1.6mm
Array Type
Board
Thickness
1.6mm
Warp Duration
1mm 10 sec.
Capacitance measurement shall
be conducted with the board bent
096、110、212 Type
glass epoxy-resin substrate
10. Body Strength
Standard
—
Temperature Compensating
(Class 1)
Specified
Value
High Frequency Type
No mechanical damage.
High Permittivity(Class 2)
—
【Test Methods and Remarks】
High Frequency Type
Applied force: 5N
Duration: 10 sec.
A
A
A
11. Adhesive Strength of Terminal Electrodes
Standard
High Frequency Type
Temperature Compensating
(Class 1)
Specified
Value
No terminal separation or its indication.
High Permittivity(Class 2)
【Test Methods and Remarks】
Multilayer Ceramic Capacitors
Array Type
Applied force
Duration
Applied force
Duration
042、063 Type
105 Type or more
2N
5N
096 Type
2N
5N
30±5 sec.
30±5 sec.
110、212 Type
12. Solderability
Standard
Temperature Compensating
(Class 1)
Specified
Value
High Frequency Type
At least 95% of terminal electrode is covered by new solder.
High Permittivity(Class 2)
【Test Methods and Remarks】
Solder type
H60A or H63A
Sn-3.0Ag-0.5Cu
Solder temperature
Duration
Eutectic solder
230±5℃
245±3℃
4±1 sec.
Lead-free solder
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc_reli_e-01
mlcc_reli-R2
■ RELIABILITY DATA
13. Resistance to Soldering
Appearance:
Capacitance change: Within ±2.5% or ±0.25pF, whichever is larger.
Q: Initial value
No abnormality
Standard
Insulation resistance: Initial value
Withstanding voltage(between terminals): No abnormality
Temperature Compensating
(Class 1)
Appearance:
Capacitance change: Within ±2.5%
Q: Initial value
No abnormality
Specified
Value
High Frequency Type
Insulation resistance: Initial value
Withstanding voltage(between terminals): No abnormality
Appearance:
No abnormality
Capacitance change: Within ±7.5%(BJ, B7, C6, C7)
Within ±20%(F)
Initial value
High Permittivity(Class 2)ꢁNote 1
Dissipation factor:
Insulation resistance: Initial value
Withstanding voltage(between terminals): No abnormality
【Test Methods and Remarks】
Class 1
Class 2
105 Type
Arra(y 096, 110 Type)
None
105, 107, 212 Type
Arra(y 096, 110,212 Type)
Thermal treatment(at 150℃ for 1 hr)Note 2
042, 063 Type
042、063 Type
316, 325 Type
Preconditioning
Preheating
Preconditioning
Preheating
150℃, 1 to 2 min.
80 to 100℃, 2 to 5 min.
150 to 200℃, 2 to 5 min.
150℃, 1 to 2 min.
80 to 100℃, 2 to 5 min. 80 to 100℃, 5 to 10 min.
150 to 200℃, 2 to 5 min. 150 to 200℃, 5 to 10 min.
Solder temp.
Duration
270±5℃
3±0.5 sec.
6 to 24 hrs(Standard condition)Note 5
Solder temp.
Duration
270±5℃
3±0.5 sec.
24±2 hrs(Standard condition)Note 5
ꢁ
Recovery
Recovery
14. Temperature Cycle (Thermal Shock)
Appearance:
Capacitance change: Within ±2.5% or ±0.25pF, whichever is larger.
Q: Initial value
No abnormality
Standard
Insulation resistance: Initial value
Withstanding voltage(between terminals): No abnormality
Temperature Compensating
(Class 1)
Appearance:
Capacitance change: Within ±0.25pF
Q: Initial value
No abnormality
Specified
Value
High Frequency Type
Insulation resistance: Initial value
Withstanding voltage(between terminals): No abnormality
Appearance:
No abnormality
Capacitance change: Within ±7.5%(BJ, B7, C6, C7)
Within ±20%(F)
Initial value
High Permittivity(Class 2)ꢁNote 1
Dissipation factor:
Insulation resistance: Initial value
Withstanding voltage(between terminals): No abnormality
【Test Methods and Remarks】
Class 1
None
Class 2
Preconditioning
1 cycle
Thermal treatment(at 150℃ for 1 hr)Note 2
Step
Temperature(℃)
Lowest operating temperature +0/-3
Normal temperature
Time(min.)
30±3
2 to 3
1
2
3
4
Highest operating temperature +0/-3
Normal temperature
30±3
2 to 3
Number of cycles
Recovery
5 times
6 to 24 hrs(Standard condition)Note 5
24±2 hrs(Standard condition)Note 5
15. Humidity(Steady State)
Appearance:
No abnormality
Capacitance change: Within ±5% or ±0.5pF, whichever is larger.
Q: C<10pF: Q≧200+10Cꢁ
10≦C<30pF: Q≧275+2.5C
C≧30pF: Q≧350 (C:Nominal capacitance)
Insulation resistance: 1000 MΩ min.
Appearance: No abnormality
Standard
Temperature Compensating
(Class 1)
Specified
Value
High Frequency Type
Capacitance change: Within ±0.5pF,
Insulation resistance: 1000 MΩ min.
Appearance:
No abnormality
Capacitance change: Within ±12.5%(BJ, B7, C6, C7)
Within ±30%(F)
High Permittivity(Class 2)ꢁNote 1
Dissipation factor:
5.0% max.(BJ, B7, C6, C7)
11.0% max(. F)
Insulation resistance: 50 MΩμF or 1000 MΩ whichever is smaller.
【Test Methods and Remarks】
Class 1
Class 2
Standard
40±2℃
High Frequency Type
All items
Thermal treatment(at 150℃ for 1 hr)ꢁNote 2
40±2℃
Preconditioning
Temperature
Humidity
None
Preconditioning
Temperature
Humidity
60±2℃
90 to 95%RH
90 to 95%RH
Duration
500+24/ー0 hrs
Duration
500+24/ー0 hrs
Recovery
6 to 24 hrs(Standard condition)Note 5
Recovery
24±2 hrs(Standard condition)Note 5
ꢁ
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc_reli_e-01
mlcc_reli-R3
■ RELIABILITY DATA
16. Humidity Loading
Appearance:
No abnormality
Capacitance change: Within ±7.5% or ±0.75pF, whichever is larger.
Standard
Q:
C<30pF:Q≧100+10C/3
C≧30pF:Q≧200
(C:Nominal capacitance)
Temperature Compensating
(Class 1)
Insulation resistance: 500 MΩ min.
Appearance: No abnormality
Capacitance change: C≦2pF:Within ±0.4 pF
Specified
Value
High Frequency Type
C>2pF:Within ±0.75 pF
(C:Nominal capacitance)
Insulation resistance: 500 MΩ min.
Appearance:
No abnormality
Capacitance change: Within ±12.5%(BJ, B7, C6, C7)
Within ±30%(F)
High Permittivity(Class 2)ꢁNote 1
Dissipation factor:
5.0% max.(BJ, B7, C6, C7)
11.0% max(. F)
Insulation resistance: 25 MΩμF or 500 MΩ, whichever is smaller.
【Test Methods and Remarks】
Class 1
Class 2
Standard
High Frequency Type
All items
Preconditioning
Temperature
Humidity
None
Preconditioning
Voltage treatment
(Rated voltage are applied for 1 hour at 40℃)Note 3
40±2℃
60±2℃
Temperature
Humidity
40±2℃
90 to 95%RH
500+24/ー0 hrs
90 to 95%RH
Duration
500+24/ー0 hrs
Rated voltage
50mA max.
Duration
Applied voltage
Charge/discharge current
Recovery
Applied voltage
Charge/discharge current
Recovery
Rated voltage
50mA max.
6 to 24 hrs(Standard condition)Note 5
ꢁ
24±2 hrs(Standard condition)Note 5
17. High Temperature Loading
Appearance:
No abnormality
Capacitance change: Within ±3% or ±0.3pF, whichever is larger.
Q: C<10pF: Q≧200+10C
10≦C<30pF:Q≧275+2.5C
C≧30pF: Q≧350(C:Nominal capacitance)
Insulation resistance: 1000 MΩ min.
Appearance: No abnormality
Standard
Temperature Compensating
(Class 1)
Specified
Value
High Frequency Type Capacitance change: Within ±3% or ±0.3pF, whichever is larger.
Insulation resistance: 1000 MΩ min.
Appearance:
No abnormality
Capacitance change: Within ±12.5%(BJ, B7, C6, C7)
Within ±30%(F)
High Permittivity(Class 2)ꢁNote 1
Dissipation factor:
5.0% max(. BJ, B7, C6, C7)
11.0% max(. F)
Insulation resistance: 50 MΩμF or 1000 MΩ, whichever is smaller.
【Test Methods and Remarks】
Class 1
Class 2
Standard
High Frequency Type
BJ, F
C6
B7, C7
Preconditioning
Temperature
None
Preconditioning
Voltage treatment(Twice the rated voltage shall be
applied for 1 hour at 85℃, 105℃ or 125℃)Note 3, 4
125±3℃
Temperature
Duration
85±2℃
105±3℃
1000+48/ー0 hrs
Rated voltage×2ꢁNote 4
50mA max.
125±3℃
Duration
1000+48/ー0 hrs
Rated voltage×2
50mA max.
Applied voltage
Charge/discharge current
Recovery
Applied voltage
Charge/discharge current
Recovery
6 to 24hr(Standard condition)Note 5
ꢁ
24±2 hrs(Standard condition)Note 5
Note 1 The figures indicate typical specifications. Please refer to individual specifications in detail.
Note 2 Thermal treatment : Initial value shall be measured after test sample is heat-treated at 150+0/-10℃ for an hour and kept at room temperature for 24±2hours.
Note 3 Voltage treatment : Initial value shall be measured after test sample is voltage-treated for an hour at both the temperature and voltage specified in the test conditions, and
kept at room temperature for 24±2hours.
Note 4 Standard condition: Temperature: 5 to 35℃, Relative humidity: 45 to 85 % RH, Air pressure: 86 to 106kPa
When there are questions concerning measurement results, in order to provide correlation data, the test shall be conducted under the following condi-
tion.
Temperature: 20±2℃, Relative humidity: 60 to 70 % RH, Air pressure: 86 to 106kPa
Unless otherwise specified, all the tests are conducted under the "standard condition".
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc_reli_e-01
mlcc_reli-R4
■ PRECAUTIONS
Precautions on the use of Multilayer Ceramic Capacitors
1. Circuit Design
◆Verification of operating environment, electrical rating and performance
1.A malfunction of equipment in fields such as medical, aerospace, nuclear control, etc. may cause serious harm to human life or have severe social ramifications.
Therefore, any capacitors to be used in such equipment may require higher safety and reliability, and shall be clearly differentiated from them used in general pur-
pose applications.
◆Operating Voltage(Verification of Rated voltage)
1.The operating voltage for capacitors must always be their rated voltage or less.
Precautions
If an AC voltage is loaded on a DC voltage, the sum of the two peak voltages shall be the rated voltage or less.
For a circuit where an AC or a pulse voltage may be used, the sum of their peak voltages shall also be the rated voltage or less.
2.Even if an applied voltage is the rated voltage or less reliability of capacitors may be deteriorated in case that either a high frequency AC voltage or a pulse voltage
having rapid rise time is used in a circuit.
2. PCB Design
◆Pattern configurations(Design of Land-patterns)
1. When capacitors are mounted on PCBs, the amount of solder used(size of fillet)can directly affect the capacitor performance. Therefore, the following items must
be carefully considered in the design of land patterns:
(1)Excessive solder applied can cause mechanical stresses which lead to chip breaking or cracking. Therefore, please consider appropriate land-patterns for proper
amount of solder.
Precautions
(2)When more than one component are jointly soldered onto the same land, each component's soldering point shall be separated by solder-resist.
◆Pattern configuration(s Capacitor layout on PCBs)
After capacitors are mounted on boards, they can be subjected to mechanical stresses in subsequent manufacturing processes(PCB cutting, board inspection,
mounting of additional parts, assembly into the chassis, wave soldering of the boards, etc.). For this reason, land pattern configurations and positions of capacitors
shall be carefully considered to minimize stresses.
◆Pattern configurations(Design of Land-patterns)
The following diagrams and tables show some examples of recommended land patterns to prevent excessive solder amounts.
(1)Recommended land dimensions for typical chip capacitors
●Multilayer Ceramic Capacitors : Recommended land dimensions(unit: mm)
ꢁWave-soldering
Land patterns for PCBs
Chip capacitor
Land
Type 107
212
2.0
316
3.2
1.6
325
3.2
2.5
L
1.6
0.8
Solder-resist
Size
W
51.25
A
0.8 to 1.0 1.0 to 1.4 1.8 to 2.5 1.8 to 2.5
0.5 to 0.8 0.8 to 1.5 0.8 to 1.7 0.8 to 1.7
0.6 to 0.8 0.9 to 1.2 1.2 to 1.6 1.8 to 2.5
C
B
C
B
B
A
Reflow-soldering
Type 042
063
0.6
0.3
105
1.0
0.5
107
1.6
0.8
212
2.0
316
3.2
1.6
325
3.2
2.5
432
4.5
3.2
Chip capacitor
L
0.4
0.2
Size
W
51.25
W
A
0.15 to 0.25 0.20 to 0.30 0.45 to 0.55 0.8 to 1.0 0.8 to 1.2 1.8 to 2.5 1.8 to 2.5 2.5 to 3.5
0.15 to 0.20 0.20 to 0.30 0.40 to 0.50 0.6 to 0.8 0.8 to 1.2 1.0 to 1.5 1.0 to 1.5 1.5 to 1.8
0.15 to 0.30 0.25 to 0.40 0.45 to 0.55 0.6 to 0.8 0.9 to 1.6 1.2 to 2.0 1.8 to 3.2 2.3 to 3.5
B
C
L
●LWDC: Recommended land dimensions for reflow-soldering(unit: mm)
LWDC
Type
105
0.52
107
50.8
212
1.25
L
Size
W
1.0
1.6
2.0
W
A
0.18 to 0.22
0.2 to 0.25
0.9 to 1.1
0.25 to 0.3
0.3 to 0.4
1.5 to 1.7
0.5 to 0.7
0.4 to 0.5
1.9 to 2.1
B
C
L
Technical
consider-
ations
●Array type: Recommended land dimensions for reflow-soldering(unit: mm)
Type 096(2 circuits)110(2 circuits)212(2 circuits) 212(4 circuits)
2 circuits
4 circuits
Chip capacitor
L
0.9
1.37
2.0
2.0
c
c
Size
W
0.6
1.0
1.25
1.25
a
b
a
a
b
a
a
0.25 to 0.35
0.15 to 0.25
0.15 to 0.25
0.45
0.35 to 0.45
0.55 to 0.65
0.3 to 0.4
0.64
0.5 to 0.6
0.5 to 0.6
0.5 to 0.6
1.0
0.5 to 0.6
0.5 to 0.6
0.2 to 0.3
0.5
b
c
d
d
d
Land
(2)Examples of good and bad solder application
Items
Not recommended
Recommended
Mixed mounting of
SMD and leaded
components
Component
placement close to
the chassis
Hand-soldering
of leaded
components
near mounted
components
Horizontal
component
placement
To next page
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc_prec_e-01
mlcc_prec-P1
■ PRECAUTIONS
Precautions on the use of Multilayer Ceramic Capacitors
2. PCB Design
◆Pattern configuration(s Capacitor layout on PCBs)
1-1. The following is examples of good and bad capacitor layouts ; capacitors shall be located to minimize any possible mechanical stresses from board warp or de-
flection.
Items
Not recommended
Recommended
Deflection of board
Technical
consider-
ations
1-2. The amount of mechanical stresses given will vary depending on capacitor layout. Please refer to diagram below.
1-3. When PCB is split, the amount of mechanical stress on the capacitors can vary according to the method used. The following methods are listed in order from
least stressful to most stressful: push-back, slit, V-grooving, and perforation. Thus, please consider the PCB, split methods as well as chip location.
3. Mounting
◆Adjustment of mounting machine
1.When capacitors are mounted on PCB, excessive impact load shall not be imposed on them.
2.Maintenance and inspection of mounting machines shall be conducted periodically.
Precautions ◆Selection of Adhesives
1.When chips are attached on PCBs with adhesives prior to soldering, it may cause capacitor characteristics degradation unless the following factors are appro-
priately checked : size of land patterns, type of adhesive, amount applied, hardening temperature and hardening period. Therefore, please contact us for further
information.
◆Adjustment of mounting machine
1. When the bottom dead center of a pick-up nozzle is too low, excessive force is imposed on capacitors and causes damages. To avoid this, the following points
shall be considerable.
(1)The bottom dead center of the pick-up nozzle shall be adjusted to the surface level of PCB without the board deflection.
(2)The pressure of nozzle shall be adjusted between 1 and 3 N static loads.
(3)To reduce the amount of deflection of the board caused by impact of the pick-up nozzle, supporting pins or back-up pins shall be used on the other side of the
PCB. The following diagrams show some typical examples of good and bad pick-up nozzle placement:
Items
Not recommended
Recommended
Single-sided
mounting
Double-sided
mounting
2. As the alignment pin is worn out, adjustment of the nozzle height can cause chipping or cracking of capacitors because of mechanical impact on the capacitors.
To avoid this, the monitoring of the width between the alignment pins in the stopped position, maintenance, check and replacement of the pin shall be conducted
periodically.
Technical
consider-
ations
◆Selection of Adhesives
Some adhesives may cause IR deterioration. The different shrinkage percentage of between the adhesive and the capacitors may result in stresses on the capaci-
tors and lead to cracking. Moreover, too little or too much adhesive applied to the board may adversely affect components. Therefore, the following precautions
shall be noted in the application of adhesives.
(1)Required adhesive characteristics
a. The adhesive shall be strong enough to hold parts on the board during the mounting & solder process.
b. The adhesive shall have sufficient strength at high temperatures.
c. The adhesive shall have good coating and thickness consistency.
d. The adhesive shall be used during its prescribed shelf life.
e. The adhesive shall harden rapidly.
f . The adhesive shall have corrosion resistance.
g. The adhesive shall have excellent insulation characteristics.
h. The adhesive shall have no emission of toxic gasses and no effect on the human body.
(2)The recommended amount of adhesives is as follows;
[Recommended condition]
Figure
212/316 case sizes as examples
a
b
c
0.3mm min
100 to 120μm
Adhesives shall not contact land
ꢁꢁ
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc_prec_e-01
mlcc_prec-P2
■ PRECAUTIONS
Precautions on the use of Multilayer Ceramic Capacitors
4. Soldering
◆Selection of Flux
Since flux may have a significant effect on the performance of capacitors, it is necessary to verify the following conditions prior to use;
(1)Flux used shall be less than or equal to 0.1 wt%(in CI equivalent)of halogenated content. Flux having a strong acidity content shall not be applied.
(2)When shall capacitors are soldered on boards, the amount of flux applied shall be controlled at the optimum level.
(3)When water-soluble flux is used, special care shall be taken to properly clean the boards.
Precautions
◆Soldering
Temperature, time, amount of solder, etc. shall be set in accordance with their recommended conditions.
Sn-Zn solder paste can adversely affect MLCC reliability.
Please contact us prior to usage of Sn-Zn solder.
◆Selection of Flux
1-1. When too much halogenated substance(Chlorine, etc.)content is used to activate flux, or highly acidic flux is used, it may lead to corrosion of terminal elec-
trodes or degradation of insulation resistance on the surfaces of the capacitors.
1-2. Flux is used to increase solderability in wave soldering. However if too much flux is applied, a large amount of flux gas may be emitted and may adversely affect
the solderability. To minimize the amount of flux applied, it is recommended to use a flux-bubbling system.
1-3. Since the residue of water-soluble flux is easily dissolved in moisture in the air, the residues on the surfaces of capacitors in high humidity conditions may cause
a degradation of insulation resistance and reliability of the capacitors. Therefore, the cleaning methods and the capability of the machines used shall also be
considered carefully when water-soluble flux is used.
◆Soldering
• Ceramic chip capacitors are susceptible to thermal shock when exposed to rapid or concentrated heating or rapid cooling.
• Therefore, the soldering must be conducted with great care so as to prevent malfunction of the components due to excessive thermal shock.
• Preheating : Capacitors shall be preheated sufficiently, and the temperature difference between the capacitors and solder shall be within 100 to 130℃.
• Cooling : The temperature difference between the capacitors and cleaning process shall not be greater than 100℃.
[Reflow soldering]
【Recommended conditions for eutectic soldering】
【Recommended condition for Pb-free soldering】
300
300
Peak 260℃ Max.
Within 10sec.
Preheating
230℃
Within 10 sec.
60sec. 60sec.
200
200
100
0
Slow
cooling
Min.
Min.
Slow cooling
100
Heating above
Preheating 150℃
230℃
Capacitor
PC board
60sec. Min.
40sec. Max.
0
Solder
T
Caution
①The ideal condition is to have solder mass(fillet)controlled to 1/2 to 1/3 of the thickness of a capacitor.
②Because excessive dwell times can adversely affect solderability, soldering duration shall be kept as
close to recommended times as possible.
Technical
consider-
ations
[Wave soldering]
【Recommended conditions for eutectic soldering】
【Recommended condition for Pb-free soldering】
300
300
Peak 260℃ Max.
230~250℃
Within 10sec.
Within 3sec.
Preheating
120sec. Min.
200
120sec. Min.
200
Slow
cooling
Slow cooling
Preheating
150℃
100
100
0
0
Caution
①Wave soldering must not be applied to capacitors designated as for reflow soldering only.
[Hand soldering]
【Recommended conditions for eutectic soldering】
【Recommended condition for Pb-free soldering】
400
400
300
200
100
0
400
300
200
100
0
Peak 350℃ Max.
Peak 280℃ Max.
230~280℃
Within 3 sec.
300
Within 3sec.
Within 3sec.
⊿T
Slow cooling
Slow cooling
⊿T
200
Slow cooling
Preheating
150℃ Min.
Preheating
150℃ Min.
100
Preheating
60sec. Min.
60sec. Min.
60sec. Min.
0
⊿T
⊿T≦150℃
⊿T
⊿T≦130℃
316type or less
325type or more
Caution
①Use a 50W soldering iron with a maximum tip diameter of 1.0 mm.
②The soldering iron shall not directly touch capacitors.
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc_prec_e-01
mlcc_prec-P3
■ PRECAUTIONS
Precautions on the use of Multilayer Ceramic Capacitors
5. Cleaning
◆Cleaning conditions
1. When PCBs are cleaned after capacitors mounting, please select the appropriate cleaning solution in accordance with the intended use of the cleaning(. e.g. to
Precautions
remove soldering flux or other materials from the production process.)
2. Cleaning condition shall be determined after it is verified by using actual cleaning machine that the cleaning process does not affect capacitor's characteristics.
1. The use of inappropriate cleaning solutions can cause foreign substances such as flux residue to adhere to capacitors or deteriorate their outer coating, resulting in
a degradation of the capacitor's electrical properties(especially insulation resistance).
2. Inappropriate cleaning conditions(insufficient or excessive cleaning)may adversely affect the performance of the capacitors.
Technical
consider-
ations
In the case of ultrasonic cleaning, too much power output can cause excessive vibration of PCBs which may lead to the cracking of capacitors or the soldered
portion, or decrease the terminal electrodes' strength. Therefore, the following conditions shall be carefully checked;
Ultrasonic output : 20 W/ℓor less
Ultrasonic frequency : 40 kHz or less
Ultrasonic washing period : 5 min. or less
6. Resin coating and mold
1. With some type of resins, decomposition gas or chemical reaction vapor may remain inside the resin during the hardening period or while left under normal stor-
age conditions resulting in the deterioration of the capacitor's performance.
Precautions
7. Handling
2. When a resin's hardening temperature is higher than capacitor's operating temperature, the stresses generated by the excessive heat may lead to damage or
destruction of capacitors.
The use of such resins, molding materials etc. is not recommended.
◆Splitting of PCB
1. When PCBs are split after components mounting, care shall be taken so as not to give any stresses of deflection or twisting to the board.
2. Board separation shall not be done manually, but by using the appropriate devices.
Precautions
◆Mechanical considerations
Be careful not to subject capacitors to excessive mechanical shocks.
(1)If ceramic capacitors are dropped onto a floor or a hard surface, they shall not be used.
(2)Please be careful that the mounted components do not come in contact with or bump against other boards or components.
8. Storage conditions
◆Storage
1.To maintain the solderability of terminal electrodes and to keep packaging materials in good condition, care must be taken to control temperature and humidity in
the storage area. Humidity should especially be kept as low as possible.
・Recommended conditions
Ambient temperature
Humidity
: Below 30℃
: Below 70% RH
Precautions
The ambient temperature must be kept below 40℃. Even under ideal storage conditions, solderability of capacitor is deteriorated as time passes, so capaci-
tors shall be used within 6 months from the time of delivery.
・Ceramic chip capacitors shall be kept where no chlorine or sulfur exists in the air.
2.The capacitance values of high dielectric constant capacitors will gradually decrease with the passage of time,so care shall be taken to design circuits . Even if
capacitance value decreases as time passes, it will get back to the initial value by a heat treatment at 150℃ for 1hour.
Technical If capacitors are stored in a high temperature and humidity environment, it might rapidly cause poor solderability due to terminal oxidation and quality loss of taping/
consider- packaging materials. For this reason, capacitors shall be used within 6 months from the time of delivery. If exceeding the above period, please check solderability be-
ations
fore using the capacitors.
※RCR-2335B(Safety Application Guide for fixed ceramic capacitors for use in electronic equipment)is published by JEITA.
ꢁPlease check the guide regarding precautions for deflection test, soldering by spot heat, and so on.
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc_prec_e-01
mlcc_prec-P4
相关型号:
TMK063UJ070FP-F
Ceramic Capacitor, Multilayer, Ceramic, 25V, 1% +Tol, 1% -Tol, UJ, -750+/-120ppm/Cel TC, 0.000007uF, Surface Mount, 0201, CHIP, ROHS COMPLIANT
TAIYO YUDEN
TMK063UJ070FP-T
Ceramic Capacitor, Multilayer, Ceramic, 25V, 1% +Tol, 1% -Tol, U2J, -750+/-120ppm/Cel TC, 0.000007uF, Surface Mount, 0201, CHIP
TAIYO YUDEN
TMK063UJ070KP-F
Ceramic Capacitor, Multilayer, Ceramic, 25V, 10% +Tol, 10% -Tol, U2J, -750+/-120ppm/Cel TC, 0.000007uF, Surface Mount, 0201, CHIP
TAIYO YUDEN
TMK063UJ080CP-T
Ceramic Capacitor, Multilayer, Ceramic, 25V, 3.12% +Tol, 3.12% -Tol, U2J, -750+/-120ppm/Cel TC, 0.000008uF, Surface Mount, 0201, CHIP
TAIYO YUDEN
TMK063UJ080DP-F
Ceramic Capacitor, Multilayer, Ceramic, 25V, 6.25% +Tol, 6.25% -Tol, UJ, -750+/-120ppm/Cel TC, 0.000008uF, Surface Mount, 0201, CHIP, ROHS COMPLIANT
TAIYO YUDEN
TMK063UJ080JP-T
Ceramic Capacitor, Multilayer, Ceramic, 25V, 5% +Tol, 5% -Tol, U2J, -750+/-120ppm/Cel TC, 0.000008uF, Surface Mount, 0201, CHIP
TAIYO YUDEN
TMK063UJ090DT-W
Ceramic Capacitor, Multilayer, Ceramic, 25V, 5.56% +Tol, 5.56% -Tol, UJ, 120ppm/Cel TC, 0.000009uF, Surface Mount, 0201, CHIP, LEAD FREE
TAIYO YUDEN
TMK063UJ090JP-F
Ceramic Capacitor, Multilayer, Ceramic, 25V, 5% +Tol, 5% -Tol, U2J, -750+/-120ppm/Cel TC, 0.000009uF, Surface Mount, 0201, CHIP
TAIYO YUDEN
TMK063UJ090JP-T
Ceramic Capacitor, Multilayer, Ceramic, 25V, 5% +Tol, 5% -Tol, U2J, -750+/-120ppm/Cel TC, 0.000009uF, Surface Mount, 0201, CHIP
TAIYO YUDEN
TMK063UJ0R5CP-F
Ceramic Capacitor, Multilayer, Ceramic, 25V, 50% +Tol, 50% -Tol, U2J, -750+/-120ppm/Cel TC, 0.0000005uF, Surface Mount, 0201, CHIP
TAIYO YUDEN
TMK063UJ0R5DP-F
Ceramic Capacitor, Multilayer, Ceramic, 25V, 100% +Tol, 100% -Tol, U2J, -750+/-120ppm/Cel TC, 0.0000005uF, Surface Mount, 0201, CHIP
TAIYO YUDEN
TMK063UJ100CP-T
Ceramic Capacitor, Multilayer, Ceramic, 25V, 2.5% +Tol, 2.5% -Tol, U2J, -750+/-120ppm/Cel TC, 0.00001uF, Surface Mount, 0201, CHIP
TAIYO YUDEN
©2020 ICPDF网 联系我们和版权申明